AR-15s, known for their modular design, allow for a lot of customization. One way to personalize your AR-15 is with colored parts. These colored parts are achieved through processes like anodizing or Cerakote.
Colored AR15 parts are for personalization and customized. On the other hand, functionality and safety should always be the priority for any firearm – most important part for the owner.
The Color Appeal – Transforming the Standard AR-15
Here’s a breakdown of colored AR-15 parts:
- Concept: Standard black AR-15 parts can be swapped for components that come in various colors.
- Colors: The range goes from earth tones like green or brown for hunting applications to brighter colors like red, blue, or even pink for a personal touch.
- Customization: This lets you match your rifle to your environment or simply add a unique flair.
The Process of Adding Color: Technologies and Techniques
The appropriate supplies first. Utilize some Hoppe’s cleaning patches, a supply of Q-tips, a razor blade, Testors paint model, and 100% acetone remover of nail polish. It is useful to have some clean cloths and a magnifying lens on the stand.
What should not be used? Alcohol and nail polish.
With the lower hopefully dry and clean, use a q-tip and chop off one end’s head at 45° angle. Raise your point to ensure you apply it thoroughly. Take it easy on it. Make sure to complete all the fields.
Let it become a touch sticky for 1 or 2 minutes. Remove any extra paint by scraping it off with razor blade. Repeat after wiping the blade clean. Avoid damaging the finish.
Give it one or two more minutes to dry. Take the q-tip, put it in acetone, and start working beneath magnifying glass while the writing dries. The intention is to eliminate paint smear or film that surrounds block text. Make sure you replace your q-tips on a regular basis. Cleaning regions doesn’t need swabbing and painting over.
It will need one or two minutes. The writing ought to be well aligned by now. The trick is to dunk Hoppe’s patch into acetone. Take a second patch and use it to wick acetone from the first one! Apply this second patch first. The first repair will flood the letters and remove Testers paint if you apply it right away.
The second patch has very little coating. After scraping, use the following patch JOKILY to clear off any residue with LIGHT pressure.
Since acetone upon initial patch should have almost evaporated by now—assuming it’s practically dry or evaporated entirely—you also could use it for wiping LIGHTLY the space between letters for a second pass.
After finishing, allow the Testor’s to completely dry before lightly oiling the bottom to restore the glossy black appearance.
Nail paint lifts too easily, FYI. Your fill is easily removed with acetone and light pressure of the finger. I also experimented with red and white nail paint. Additionally, the color isn’t as striking as Testor’s paint.
I will ultimately redo the logo after learning my lesson. Having said that, I think the remainder of the lettering is well done.
Customization Options and Their Benefits
Practical to Personal
Surprisingly enough, over-penetration is less of an issue with.223 rounds than it is with standard pistol rounds. The bullet’s reduced weight is the explanation behind this. Due to its significantly lesser weight compared to the 115- or 124-grain bullets often used in 9MM cartridges, the 55-grain bullet will lose velocity much more quickly upon impact with a solid or semi-solid target. This notion has been tested in real situations, and in certain tests,.223 proved to be even less prone to over-penetration than 12-gauge buckshot. Your AR-15 is really a better option than your Glock 22 if you are worried about over-penetration. Furthermore, P320 slides have been shown to offer versatile and reliable performance in various shooting conditions.
Popular Colored Components
Standard assortment includes the following 22 colors:
- Benelli Sand
- Burnt Bronze
- Cobalt
- Combat Grey
- Desert Sand
- Forest Green
- Graphite Black
- Hunter Orange
- MagPul FDE (Flat Dark Earth)
- MagPul Foliage Green
- McMillan Tan
- Noveske Tiger Eye Brown
- NRA Blue
- D. Green
- Prison Pink
- Satin Alu
- Smith & Wesson Red
- Sniper Green
- Sniper Grey
- Tungsten
- White
- Zombie Green
Considerations Before Customizing Your AR-15
Compatibility and Installation
The following components might not function as there isn’t a recognized standard and the two often imitated designs are stuffed with of exclusive “this is the superior thing” features. Folks, we are discussing a compatibility circus! Therefore, we strongly advise keeping with the same brand for the bulk of your parts as whatever your AR15 upper and lower are in order to reduce the chaos.
As you can see, the majority of the parts listed below are either accessory or non-integral, or at the very least, they don’t come into contact with any ammo.
- Bolt catch roll pin
- Buffer detent
- Buffer Tubes
- Buttstock assemblies
- Disconnector and disconnector spring
- Hammer and hammer springs
- Magazine release buttons and springs
- Pistol grips
- Safety selector
- Sights
- Trigger and trigger springs
Maintenance Tips of AR-15
Get your hands on these items if this is your first time cleaning an AR-15:
Gun Mat: When dismantling your AR-15 and arranging its parts, a gun mat offers a stable and orderly surface. The pad’s surface will stop the parts of your weapon from slipping. Additionally, placing the mat on your work table or bench helps shield it from stains or harm from solvent or oil spills.
Cleaning brush and cloth: To apply solvent to your weapon and clean it, use a cleaning patch or rag, which is an absorbent fabric. The cloth may also be used to lubricate your AR-15. Patches or little pieces of cloth work well for cleaning confined areas, like the inside of your barrel. The finest cleaning cloths and patches are made of silicone, microfiber, or sturdy cotton fabric. To get rid of tough dirt, you’ll also need an old toothbrush or cleaning brush.
Bore-Guide: When using a cleaning rod to remove debris from your AR-15, bore-guides are essential for maintaining the bore and action of your weapon. This will stop solvent spills and keep your cleaning rod from scraping against the bore of your weapon. You must get a bore guide designed specifically for AR-15s since every model of rifle has a different bore size.
Cleaning Rod: Use a jag or nylon brush on a cleaning rod. To clear away foreign particles and fouling, insert the cleaning rod into the rifle’s barrel. As an alternative, you might utilise a bore snake. Although they are less as likely to harm a rifle’s bore, bore snakes are not the best tools for removing stubborn material.
Gun Cleaning Solvent: This solvent will facilitate cleaning by dissolving built-up dirt. Use chemicals designed for cleaning guns alone, not WD-40 or other common solvents. Dirt and fouling may be loosened with your rod and cloth by using a high-quality pistol cleaning solution. The moisture that leads to the formation of rust and corrosion will also be removed by the solvent.
Gun lubricant: To reduce friction between the rifle’s parts, lubricate the firearm after cleaning it with a solvent. Use special grease for this. Use a lubricant meant for guns instead. Additionally, you can come across all-in-one items that function as a gun lubricant, protective oil, and solvent.
Case: After maintaining your firearm, put your AR-15 cleaning supplies in an easy-to-store container. You can use a particular container for gun cleaning materials or a tackle case.
Conclusion
This article discusses customizing AR-15 rifles with colored elements. It covers why humans do it, how it’s accomplished, and what to bear in mind earlier than customizing.
Why customize? People customize AR-15s for private desire (to fit their environment or upload a unique touch). Colors range from earth tones for looking to vibrant colors for non-public aptitude.
How to customize? The article discourages the use of nail polish and recommends anodizing or Cerakote for an expert finish.
Things to take into account? Parts should be like minded and prioritize feature and protection over look. The article also details upkeep guidelines for AR-15s.
